MHG 331
Combined Temperature Detector
The MHG 331 Combined Temperature Detector is a conventional fire detector with voltage characteristics intended for an automatic fire signalling as a detector of a temperature rise, in cooperation with the central control units of the electric fire signalling system LITES Liberec.
The MHG 331 Combined Temperature Detector is a conventional fire detector with voltage characteristics intended for an automatic fire signalling as a detector of a temperature rise, in cooperation with the central control units of the electric fire signalling system LITES Liberec.
The MHG 331 Combined Temperature Detector is designed for places where in case of fire a temperature rise or a sudden temperature increase can be anticipated. This detector responds to a reached temperature rate or to temperature changes before and during a fire.
The MHG 331 detector is to install to the socket MHY 734.029. It is possible to connect it to the central control units MHU 113, MHU 108, MHU 106 with the loop unit JSM-5, or to theaddressable central control units of the electric fire signalling system LITES by means of the addressing unit MHY 409. It is also possible to attach the signal lighting units MHS 409, MHS408 (parallel signalling).
For use in the electric fire signalling system the detector is liable to the agreement examination according to law No. 22/1997 Sb., in wording law No. 71/2000 Sb. and the relevant orders of the government.
It fulfils the requirements of the European standard specification EN 54 – 5.
Technical specifications | |
---|---|
Supply voltage range | (16 ÷ 24) Vss |
Nominal voltage | 21,5 Vss |
Steady state current (on typical use temperature) | Gr. A2R max. 45 μA, Gr. BR max. 60 μA |
Current at alarm mode (including optical signalling) | max. 100 mA (limited by the control unit) |
Operating voltage at fire alarm | 6 - 8 V d. c. at 10 mA |
Optical signalling | a couple of red LED (light emitting diodes) |
Parallel signalling | type LITES |
Detector classification | according to EN 54-5 adjustable A2R and BR |
Typical use temperature | for the class A2R 25 °C, f or BR 40 °C |
Maximum use temperature | for the class A2R 50 °C, f or BR 65 °C |
Statical response temperature | for A2R (54 ÷ 70) °C , for BR (69 ÷ 85) °C |
Response time at temperature increase from the typical use temperature | according to EN 54-5 class A2R and BR |
Testing procedure | by the test bar MHY 533 |
Protection according to ČSN EN 60529 | IP 44 |
Safety requirements | product intended for a plant with safety arrangement in terms of ČSN EN 60950 |
Radioscreening degree | B-class equipment |
Dimensions | ø98 × 42 mm |
Weight | cca 100 g |
Working conditions | |
---|---|
The MHG 331 detector is intended for environments protected against weather influence, without occurence of agressive substances, and for places where its protection and climatic immunity suits, and where sudden temperature changes leading to dew and ice accretion don`t occur. | |
Working temperature range | -25 °C to +65 °C |
Period of significant temperature (45°C ÷ 70°C) | 2 m onth in a year |
Relative humidity | max. 95% at +40 °C |
Period of significant humidity (85%÷95%/40°C) | 100 hours in a year |